Skip to main content
Crisis Centre
${alt}

Moustafa El-Gindy
Bsc, MSc, PhD (Technical University of Budapest), PEng

Professor

Department of Automotive, Mechanical and Manufacturing Engineering

Faculty of Engineering and Applied Science

Contact information

2000 Simcoe Street North
Oshawa, Ontario L1H 7K4
Office: ACE 4021

905.721.8668 ext. 5718
905.721.3370 (fax)

moustafa.el-gindy@uoit.ca

Office hours:
Tuesday 12:00 - 13:30


Research topics

  • Aircraft landing dynamics
  • Articulated heavy vehicles
  • Bus testing and simulation
  • Crash testing and simulations
  • High-velocity impact and ballistics simulation
  • Multi wheels military vehicles dynamics
  • Self-steering axles simulation
  • Tire mechanics
  • Tire-soft and hard soils interaction
  • Vehicle dynamics
  • and Virtual human modelling.

Education

  • PhD (Mechanical Engineering) Technical University of Budapest, Hungary, 1980
  • MSc (Automotive Engineering), Ain Shams University, Egypt, 1975
  • BSc (Automotive Engineering), Ain Shams University, Egypt, 1971

Courses

  • Automotive Engineering;
  • Heavy Vehicle Dynamics;
  • Mechanical Vibrations;
  • Statics and Solid Mechanics;
  • Vehicle Design; and
  • Vehicle Dynamics.

Research and expertise

Current Students

Zeinab El-Sayagh
PhD Candidate
Fall 2016 – Present

Modeling and Analysis of Truck Tire-Terrain Interaction

University of Ontario Institute of technology

Email: zeinab.el-sayegh@uoit.ca

Linkedin

Office: ACE 4030B-2

Amr Mohamed
PhD Candidate
Winter 2016 – Present

Development of Mathematical models of Autonomous Multi-Wheeled Combat Vehicle

University of Ontario Institute of technology

Email: amr.mohamed@uoit.net

Office: ACE 4030B-1


PhD Candidate
Winter 2016 – Present

Development of Mathematical models of Autonomous Multi-Wheeled Combat Vehicle

University of Ontario Institute of technology

Email: amr.mohamed@uoit.net

Office: ACE 4030B-1

Masters

Brett Russell
MaSc Candidate
Winter 2016 – Present

Development of Off-Road Rigid Ring Model for RHD Truck Tire

University of Ontario Institute of technology

Email: brett.russell@uoit.net

Office: ACE 4030B-2

Hao (Aaron) Tan
MaSc Candidate
Spring 2017 – Present

Theoretical and Experimental development and testing of an Autonomous scaled 8x8 combat Vehicle

University of Ontario Institute of technology

Email: hao.tan@uoit.net

Linkedin

Office: ACE 4030B-2

Graduated Students

Doctoral

Shahram Shokouhfar
PhD Graduate
Summer 2011 – Winter 2017

Development of Tire-Terrain Interaction Model using LSDYNA

University of Ontario Institute of technology

Email: hao.tan@uoit.net

Office: ACE 4030B-2

Hossam Ragheb
PhD Graduate
Winter 2012-Winter 2015

Development of Torque Strategy for Off-Road Vehicle

University of Ontario Institute of technology

Seokyong Chae
PhD Graduate
Spring 1999- Summer 2006

Non-linear FEA Tire Materials Modelling using Pam-Shock

The Pennsylvania State University

Joel R. Anstrom
PhD Graduate
Spring 1999- Summer 2006

Spring 1997- Fall 2002 Model Development for Hybrid Electric Vehicle Stability Assist Systems

The Pennsylvania State University

Yin-ping Chang
PhD Graduate
Spring 1999- Spring 2002

Development of FE Transient Tire Model using Pam-Shook

The Pennsylvania State University

Robert Goldman
PhD Graduate
Spring 1997- Fall 2001

Inelegant Rollover Warning Systems for Heavy Vehicle

The Pennsylvania State University

Ali Ghazizadeh
PhD Graduate
Spring 1995- Spring 2000

Development of Intelligent Rollover System

The Pennsylvania State University

Ali Ghazizadeh
PhD Graduate
Spring 1995- Spring 2000

Development of Intelligent Rollover System

The Pennsylvania State University

Masters

Kristian Lardner
MaSc Graduate
Spring 2015 – Spring 2017

Development of Off-Road Rigid Ring Model for RHD Truck Tire

University of Ontario Institute of technology

Arnold Ordigo
MaSc Graduate
Spring 2015 – Spring 2017

Development of Skid-Steer Control Strategies for 8x8 Combat Vehicle

University of Ontario Institute of technology

Peter D’urso
MaSc Graduate
Fall 2104 – Spring 2016

Development of Torque Vectoring and active Steering Control Strategies for an 8x8 Combat Vehicle

University of Ontario Institute of technology

Mehrsa Marjani
MaSc Graduate
Spring 2014 – Fall 2016

Development of driver vigilance level detection systems

University of Ontario Institute of technology

Adam Cook
MaSc Graduate
Spring 2014 - Spring 2016

Optimization and Design of Advanced Front Underride Protection Device using LSDYNA

University of Ontario Institute of technology

Adam Reid
MaSc Graduate
Winter 2013- Spring 2015

Development of FEA Duel Tire-Road Interaction Model using Pam-Crash

University of Ontario Institute of technology

Todd McDonald
MaSc Graduate
Summer 2012 – Spring 2014

Development of tuck Front Underride Protection Device using LSDYNA

University of Ontario Institute of technology

Patrick Galipeau-Belair
MaSc Graduate
Summer 2012 – Spring 2014

Development of tractor-semitrailer Side Underride Protection Device using LSDYNA

University of Ontario Institute of technology

Ranvir Dhillion
MaSc Graduate
Fall 2010 - Fall 2012

Development of FEA Tire-Road Interaction Model using Pam-Crash

University of Ontario Institute of technology

Daniel Maciejewski
MaSc Graduate
Spring 2008 – Spring 2010

Development of tractor-semitrailer Coupling Model using Pam-Crash

The Penn State University

Ryan J Lescoe
MaSc Graduate
Spring 2008-Spring 2010

Virtual Crash Testing using FEA Techniques

The Penn State University

Guntas Malhotra
MaSc Graduate
Spring 2008-Spring 2010

Development of Inertia Based Traction Control for hybrid electric Vehicle

The Penn State University

Jim D’Lorio
MaSc Graduate
Spring 2007- Fall 2008

Vehicle Yaw Control Utilizing Electric Drivtrains with Multiple Electric Motors

The Penn State University

Jeff L Slade
MaSc Graduate
Spring 2007- Spring 2009

Non-linear FEA Truck Tire Modelling using Pam- Shock

The Penn State University

Jonathon Culp
MaSc Graduate
Summer 2006 – Fall 2007

3D Image Generation and Integration with Vehicle Dynamics Models of the PSU Truck Driving Simulator

The Penn State University

Brent Shoffner
MaSc Graduate
Summer 2006 – Fall 2007

Kingpin Load Study during Tractor-Semitrailer Coupling

The Penn State University

James Allen II
MaSc Graduate
Summer 2005-Fall 2007

Non-linear FEA Truck Tire Modelling using Pam-Shock

The Penn State University

Aric Sherwood
MaSc Graduate
Spring 1999-Fall 2005

Evaluation of Thermal Imagers for Vehicle Driving Performance

The Penn State University

Abehshik Joshi
MaSc Graduate
Fall 2002- Spring 2004

Design and Simulation of an Underride Guard for Heavy Vehicles using LS-DYNA

The Penn State University

Meghan Henty
MaSc Graduate
Spring 2001- Fall 2003

FEA of Occupant injury using Pam-Safe

The Penn State University

Sara Beth Inman
MaSc Graduate
Fall 2000- Fall 2002

Performance Evaluation of Hybrid Electric Vehicle

The Penn State University

Andrew Hoskins
MaSc Graduate
Spring 2000- Fall 2002

Truck Simulator for Drivers Training

The Penn State University

Yongjie (Robert) Lai
MaSc Graduate
Fall 1999- Fall 2000

Influence of Tire Imbalance on Ride Comfort of a 5-axle Tractor/Semitrailer

The Penn State University

Zhenyu Jiang
MaSc Graduate
Spring 1998- Fall 1999

Ride Comfort Modelling of a Tractor/Semitrailer using DADS

The Penn State University

Nabila Shawki
MaSc Graduate
1996-1988

Dynamic Response of an automotive Independent Suspension

Ain Shams University

Riskh Saad
MaSc Graduate
1986-1988

Performance of heavy-duty Brakes

Ain Shams University

Publications and presentations

  • Selected publications and presentations

    Refereed journal publications:

    1. Amr Mohamed, Jing Ren, Alhossein M. Sharaf, Moustafa El-Gindy, “Optimal Path Planning for Unmanned Ground Vehicles using Potential Field Method and Optimal Control Method”. Int. J. Vehicle Performance  (IJVP), Vol. 4, No. 1, pp. 1-14, (2018)
    2. El-Sayegh, Z. and El-Gindy, M. " Cornering Characteristics of a Truck Tire on Wet Surface Using Finite Element Analysis and Smoothed-Particle Hydrodynamics." Control engineering practice (Under Review)
    3. El-Sayegh, Z., El-Gindy, M., Johansson, I. and Öijer, F., Improved Tire-Soil Interaction Model Using FEA-SPH Simulation, In Journal of Terramechanics, 2017, JTERRA_2017_114 (Under Review)
    4. El-Sayegh, Z., El-Gindy, M., Johansson, I. and Öijer, F. ‘Truck tire-terrain interaction modeling and testing: literature survey,' Int. J. Vehicle Systems Modelling and Testing (in press)
    5. El-Sayegh, Z. and El-Gindy, M. (2017) ‘Sensitivity analysis of truck tyre hydroplaning speed using FEA-SPH model’, Int. J. Vehicle Systems Modelling and Testing, Vol. 12, Nos. 1/2, pp.143–161
    6. Amr Mohamed, Jing Ren, Moustafa EI-Gindy, Haoxiang Lang and Waleed Ouda, "Literature Survey for Autonomous Vehicles: Sensor Fusion, Computer Vision, System Identification and Fault Tolerance", International Journal of Automation and Control (IJAAC) (Accepted). (2017)
    7. A. Odrigo and M. El-Gindy, “Application of Optimal Control for Skid Steering in Future Electric Combat Vehicle”, International Journal of Automation and Control (IJAAC), (Accepted)​ (2017)
    8. Amr Mohamed, Jing Ren, Haoxiang Lang, Moustafa EI-Gindy, “Optimal Path Planning for an Autonomous Articulated Vehicle with Two Trailers”. International Journal of Automation and Control (IJAAC), (Accepted) (2017)
    9. Mehrsa Marjani, Moustafa El-Gindy, David Philipps, Inge Johansson and Fredrik Öijer “Development of FEA Tire/Soil Interaction Model using SPH and Hybrid SPH/FEA Techniques”, International Journal of Vehicle Performance (IJVP), Vol 3, No.3, pp. 199-223 (2017).
    10. Laith Dababneh and Moustafa El-Gindy, “Real-time Non-intrusive Monitoring and Prediction of Driver Distraction”, International Journal of Vehicle Performance (IJVP), Vol.11, No.3, pp.193-216. (2016)
    11. Shahram Shokouhfar, Subhash Rakheja and Moustafa El-Gindy “Development of a Rolling Truck Tire Model using an Automatic Model Regeneration Algorithm“ Vehicle Systems Dynamics, International Journal of Vehicle Mechanics and Mobility, Vol. 11, No. 1 (2016)
    12. Amr Mohamed, Jing Ren, Moustafa EI-Gindy., “Advanced Control Techniques for Unmanned Ground Vehicle: Literature Survey”. Int. J. Vehicle Performance (IJVP), (Accepted) (2016)
    13. Shahram Shokouhfar, Subhash Rakheja and Moustafa El-Gindy “Development of a Virtual Testing Enviroment for Parametrization of Evaluation of terramechanics-based rolling Tyre-Soil Interaction Models: Part I - Parametrization” International Journal Terramechnanics (IJTM), (Submitted for review), (2016)
    14. Shahram Shokouhfar, Subhash Rakheja and Moustafa El-Gindy “Development of a Virtual Testing Enviroment for Parametrization of Evaluation of terramechanics-based rolling Tyre-Soil Interaction Models: Part II - Modeling” International Journal Terramechanics (IJTM), (Submitted for review), (2016)
    15. Shahram Shokouhfar, Subhash Rakheja1, Moustafa El-Gindy, “Development of a Computationally Efficient Rolling Truck Tire Model using Part-Composite Approach and its Verification,” International Journal of Vehicle Systems Modeling and Testing, Vol.11, No. 2 (2016)
    16. Shahram Shokouhfar, Subhash Rakheja1, Moustafa El-Gindy, “Modal Analysis of a Rolling Truck Tire Subject to Inflation Pressure and Vertical Deflection,” International Journal of Vehicle Systems Modeling and Testing, Vol 11, No 2 (2016)
    17. A. Odrigo, M. El-Gindy, P. Petterson, Z. Sabartova, and P. Lindroth, “Design and Development of Road Profile Generator” International Journal Vehicle Systems Modeling and Testing (IJVSMT), Vo. 11, No. 3, (2016)
    18. P. D’Ursu, M. El-Gindy, “Development of H∞ Control Strategy for a Multi-Wheeled Combat Vehicle - A Literature Survey” International Journal of Vehicle Performance (IJVP), (Accepted) (2016)
    19. P. D’Ursu and M. El-Gindy, “Development of H∞ Control Strategy for a Multi-Wheeled Combat Vehicle”, International Journal of Automation and Control "IJAAC", (Accepted) (2016)
    20. Laith Dababneh and Moustafa El-Gindy, “Driver vigilance level detection systems: a literature survey”, International Journal of Vehicle Performance (IJVP), Vol.2, No.1, pp.1-29 (2015)
    21. Patrick Galipeau-Belair, Moustafa El-Gindy, Srikanth Ghantae, David Critchley, and Sarathy Ramachandra “Development of a Regulation for Testing the Effectiveness of Rigid Side Underride Protection Device (SUPD)” International Journal of Crashworthiness, 2014, DOI: 10.1080/13588265.2013.868083.
    22. Todd MacDonald, Moustafa El-Gindy, Srikanth Ghantae, David Critchley, and Sarathy Ramachandra “Front Underride Protection Device (FUPD) Development: Design Strategy with Simultaneous Loading” International Journal of Crashworthiness, February 2014. DOI: 10.1080/13588265.2014.887432.
    23. J. Allan and M. El-Gindy “Development of an advanced Effective Road Profile Filter for a Rigid Tire Quarter-Vehicle Model”, International Journal of Vehicle Performance, Vol. 1, No. 1, pp.28-48, 2013. (ISSN 1745-3194)
    24. H. Ragheb, M. El-Gindy and H.A. Kishawy, “Multi-Wheeled Combat Vehicle Manoeuvrability on Soft Terrain, Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility (ISSN: 0042-3114) (2013) (in progress)
    25. Todd MacDonald, Moustafa El-Gindy, Srikanth Ghantae, David Critchley, and Sarathy Ramachandra “A Comprehensive Review of Front Underride Protection Device Design and     Evaluation” International Journal of Vehicle Modeling and Testing, Vo. 8, No. 4, pp. 134-146, 2013.
    26. Morgan Yasser, Bias Abdul, El-Gindy Moustafa, "A Stochastic Model for Environment Sensing Correction," IETE Journal of Research, Vol. 59, Issue 2, pp. 176-188, ( 2013), (ISSN: 0377-2063)
    27. H. Ragheb, M. Aydin, M. El-Gindy and H.A. Kishawy, “Comparison of Gradability Performance of Fuel Cell Hybrid Electric and Internal Combustion Engine Vehicles“, Journal of Power Sources 221, pp. 447-454, 2013.
    28. R. Ali, R. Dillon, M. El-Gindy, Fredrik Öijer, Inge Johansson and M. Trivedi “Prediction of Rolling Resistance and Steering Characteristics using a Finite Element Analysis Truck Tyre Model,” International Journal for Vehicle Systems Modeling and Testing, IJVSMT Vol. 8, No.2. pp. 179-201, 2013.
    29. H. Ragheb, M. El-Gindy and H.A. Kishawy, “Multi-wheeled Off-Road Vehicle Performance and Control“, International Journal of Vehicle Systems Modeling and Testing, Vol. 8, No. 3, pp.108-111, 2013.
    30. Patrick Galipeau-Belair, Moustafa El-Gindy, Srikanth Ghantae, David Critchley, and Sarathy Ramachandra “A Review of Side Underride Statistics and Protection Device Literature and Designs” International Journal of Heavy Vehicle Systems, Vol.20, No. 4, pp. 230-245, 2013.
    31. Manuel Castellanos, M. El-Gindy, C. Fedishen, D. Maciejewski, and A. Atahan, “Development of Heavy Truck Front Underride Device” International Journal of Heavy Vehicle Systems, Vol. 19, No. 1, pp. 60-75, 2012. (ISSN 1744-232)
    32. M. El-Gindy, T. Baltovski, A. Atahan, and M. Castellanos, “Heavy Truck Front Underride Protection (FUPD) Design Procedure, International Journal for Vehicle Systems Modeling and Testing, Vol. 6, No. 2, pp. 102-125, 2011. (ISSN: 1745-6436)
    33. M. A. Haque, A. V. Desai, and M. El-Gindy “Driver-Vehicle Interfacial Dynamics: A Robust Cue for Driver Fatigue” International Journal of Heavy Vehicle Systems, Vol. 18, No. 1, 2011 (ISSN 1744-232)
    34. Manuel Castellanos, M. El-Gindy, C. Fedishen, D. Maciejewski, and A. Atahan, “Heavy  Truck Front Underride Development: Literature Survey International Journal of Heavy Vehicle Systems, Vol. 18, No. 1, 2011 (ISSN 1744-232)
    35. Ali O. Atahan and Moustafa El-Gindy, “Virtual Crash Tests: Literature Survey”, International Journal of Heavy Vehicle Systems, Vol. 16, No. 1, 2009.
    36. J. Culp, M. El-Gindy and M. A. Haque, “Driver Alertness Monitoring Techniques: A Literature Review ” International Journal of Heavy Vehicle Systems, Special Issue on “Advanced Mutli-Wheel vehicle Technologies”, Vol. 15, No. 2/3/4, pp. 255-271, 2008.
    37. A.H. Hoskins and M. El-Gindy, “Technical Report: Literature Survey on Driving Simulator Validation Studies”, International Journal of Heavy Vehicle Systems, Vol. 13, No. 3, pp.241-252, 2006.
    38. R. Goldman, M. El-Gindy and B. Kulakowski, “Development of a Software-Based Rollover Warning Device”, International Journal of Heavy Vehicle Systems, Vol. 12, No. 4, pp.282-306, 2005.
    39. Y. Chang, M. El-Gindy and D. Streit, “Literature Survey of Transient Dynamic Response Tire Models” Heavy Vehicle Systems, special series, of Int. J. of Vehicle Design, Vol. 34 , No.4, pp.354-386, 2004.
    40. S. Inman, M. El-Gindy and D. C. Haworth, “Hybrid Electric Vehicles Technology and Simulation: Literature Review”, International Journal of Heavy Vehicle Systems, Edited by Professor Steve Velinsky, University of California-Davis, Vol. 10, No. 3, pp.167-187, 2003.
    41. D. Tobric, M. El-Gindy, L. Elefteriadou and Z. Jiang, "Bicycle-Friendly Shoulder Rumble Strips". Int. J. of Vehicle Design, Vol.33, No.4, pp.440-466, 2003.
    42. D. Tobric, M. El-Gindy and L. Elefteriadou, "Methodology for Quantifying Whole-Body Vibration Experienced by Bicyclists". Int. J. of Vehicle Design, Vol.31, No.4, pp452-480, 2003.
    43. Y. Chang, M. El-Gindy and D. Streit, “Influence of Tire Loading and Inflation Pressure on Standing Waves     Phenomenon using Pam-Shock” International Journal of Heavy Vehicle Systems, special Issue on “Advanced Heavy Vehicle Simulation”, Guest Editor: Professor Giacomo Mantriota, Italy, Vol. 10,Nos. 1/2,       pp.86-110, 2003.
    44. S. Lewis and M. El-Gindy, "Sliding Mode Control for Rollover Prevention of Heavy Vehicles Based on Lateral Acceleration”, International Journal of Heavy Vehicle Systems, special issue on “Advanced Heavy Vehicles Simulation”, Guest Editor: Professor Giacomo Mantriota, Italy, Vol. 10, Nos. 1/2, pp.9-34, 2003.
    45. M. Henty, M. El-Gindy and B.T. Kulakowski, “Physical and Virtual Rollover Crash Tests: A Literature Review”, Technical Report, Int. Journal of Heavy Vehicle Systems, Vol. 9, No. 4, pp.368-382, 2002.
    46. M. El-Gindy and X. Tong, "Stability and Braking Performance Analysis of Bus/Pony-Trailer Combination Vehicles" Heavy Vehicle Systems, special series, of Int. J. of Vehicle Design, Vol. 8, No. 3/4, pp.285-300, 2001.
    47. M. El-Gindy, N. Mrad and X. Tong, "Sensitivity of a Rearward Amplification Control of a Truck/Full-Trailer." Int. Journal of Automotive Engineering, IMech, Vol 215 Part D, pp.579-588, 2001.
    48. D. Tobric, M. El-Gindy and L. Elefteriadou, "Development of More Bicycle-Friendly Rumble Strip Configurations”, Transportation Research Board, TRB Record No. 1773, paper number 01-2358, pp.23-31, 2001.
    49. Z. Jiang, D. A. Streit and M. El-Gindy, “Heavy Vehicle Ride Comfort: Literature Survey” Heavy Vehicle Systems, special series, of Int. J. of Vehicle Design, Vol. 8, No. 3, pp.258-284, 2001.
    50. R W. Goldman, M. El-Gindy and B. T. Kulakowski, “Rollover Dynamics of Road Vehicles: Literature Survey”, Heavy Vehicle Systems, special series, of Int. J. of Vehicle Design,  Vol. 8, No. 2, pp 103-141, 2001.
    51. Ghazi Zadeh, A. Fahim and M. El-Gindy, "Neuro-Leaf Spring”, Heavy Vehicle Systems, special series, of Int. J. of Vehicle Design, Vol.7, No. 4, pp.114-132, 2000.
    52. J. Xiao, B. T. Kulakowski and M. El-Gindy, “Prediction of Risk of Wet-Pavement Accidents Fuzzy Logic Model”, Transportation Research Record 1717, Paper No. 00-0268, pp. 28-36, 2000.
    53. M. El-Gindy, S. Lewis and N. Mrad, "Active Control of a Truck/Full-Trailer's Rearward Amplification", Heavy Vehicle Systems, special series, of Int. J. of Vehicle Design, Vol. 5, No.3/4, pp. 277-299, 1998.
    54. W. Kenis, N. Mrad and M. El-Gindy, "Spatial Repeatability of Dynamic Wheel Loads for Heavy Vehicles: a Literature Review", Heavy Vehicle Systems, special series, International Journal of Vehicle Design, Vol.5, No.2, pp.116-148, 1998.
    55. X. Tong, B. Tabarrok and M. El-Gindy, "Dynamics of Logging Trucks", Heavy Vehicle Systems, special series, of Int. J. of Vehicle Design, Vol.5, No.1, pp.69-94, 1998.
    56. J. Preston-Thomas and M. El-Gindy, "Path Compliance in Lane-Change Tests Designed to Evaluate Rearward Amplification", Heavy Vehicle Systems, special series, Int. Journal of Vehicle Design, Vol.5, No.1, pp.25-44, 1998.
    57. Gazizadeh, A. Fahim and M. El-Gindy, "Neural Network and Fuzzy Logic Applications to Vehicle Systems: Literature Review", Int. Journal of Vehicle Design, Vol.18, No.2, pp.132-193, 1997.
    58. Gazizadeh, A. Fahim and M. El-Gindy, "Neural Network Representation of a Vehicle Dynamics: Neuro-Vehicle (NV), Int.  Journal of Vehicle Design, Vol.17, No.1, pp.55-75, 1996.
    59. E. S.K. Fekpe and M. El-Gindy, "Relating Truck Productivity to Safety Related Performance Measures", Heavy Vehicle Systems, special series, Int. Journal of Vehicle Design, Vol. 4, No. 1 pp.10-28, 1997.
    60. L. Palkovics, M. El-Gindy and H.B. Pacejka, “Applications of Neural Networks to Tire Modelling for Vehicle Simulation,” International Journal of Heavy Vehicle Systems, special Issue on “Vehicle-Road and Vehicle-Bridge Interaction”, Guest Editor: Professor Bohdan Kulakowski, USA, Vol. 3, Nos. 1-4, pp.323-345, 1996.
    61. L. Palkovics and M. El-Gindy, "Examination of Different Control Strategies of Heavy-Vehicle Performance", ASME Journal of Dynamic Systems, Measurement and Control, Vol. 118, pp.489-498, 1996.
    62. M. El-Gindy, "An Overview of Performance Measures for Heavy Commercial Vehicles in North America", Int. Journal of Vehicle Design, Vol.16, No.4, pp.441-463, 1995.
    63. L. Palkovics and M. El-Gindy, "Design of an Active Unilateral Brake Control Strategy for a Tractor-Semitrailer based on Sensitivity Analysis", Vehicle System Dynamics, Vol.24, No.10, pp.725-758, 1995.
    64. M. El-Gindy, L. Tong and B. Tabarrok, "Frequency Response of Canadian Logging Trucks", Vehicle System Dynamics, Vol.23, pp. 325-349, 1994.
    65. L. Palkovics, M. El-Gindy and H.B. Pacejka, "Modelling of Tire Cornering Characteristics on an Uneven Road Surface; Dynamical Version of the "Neuro-Tyre", Int. Journal of Vehicle Design, Vol.15, No.1/2, pp. 189-208, 1994.
    66. M. El-Gindy and L. Palkovics, "Possible Application of Artificial Neural Networks to Vehicle Dynamics and Control: A Literature Review", Int. Journal of Vehicle Design, Vol.14, No.5/6, pp.592-614, 1993.
    67. L. Palkovics and M. El-Gindy, "Neural Networks Representation of Tire Characteristics: the "Neuro-Tyre", Int. Journal of Vehicle Design, Vol. 14, No. 5/6, pp.134-155, 1993.
    68. M. El-Gindy and E.C. Mikulcik, "Sensitivity of Vehicle's Yaw Rate Response; Application to a Three-Axle Truck", Int. Journal of Vehicle Design, Vol.14, No.4, pp.325-352, 1993.
    69. P.A. LeBlanc and M. El-Gindy, "Directional Stability of a Straight Truck Equipped with a Self-Steering Axle", Int. Journal of Vehicle Design, Vol.13, No.5/6, pp.459-474, 1992.
    70. M. El-Gindy, "Dynamic Behaviour of a tractor/Quadaxle Trailer with Variable Length Drawbar", Int. Journal of Vehicle Design, Vol.13, No.2, pp182-200, 1992.
    71. M. El-Gindy and Y.H. Hossam, "Sensitivity Parametric Analysis of UMTRI Static Roll Model", Int. Journal of Vehicle Design, Vo.10, No.2, pp.187-209, 1989.
    72. M. El-Gindy, "Directional Response of a Tractor Towing a Semitrailer", Int. Journal of Vehicle Design, Vol.10, No.2, pp.210-226, 1989.
    73. M. El-Gindy and J.Y. Wong, "A Comparison of Various Computer Simulation Models for Predicting the Directional Response of Articulated Vehicles", Int. Journal of Vehicle System Dynamics, Vol.16, No. 5-6, pp.249-268, 1987.
    74. M. El-Gindy, "Evaluation of Mathematical Models Used to Predict the Directional Behaviour of a Tractor-Semitrailer", Bulletin of Faculty of Engineering, Ain Shams University, Vol. 2, No. 17, pp. 17-38, 1985.
    75. M. El-Gindy and L. Ilosvai, "Computer Simulation Study on a Vehicle Directional Response in Some Severe Manoeuvres-Part 2: Steering and Braking Manoeuvres", Int. Journal of Vehicle Design, Vol.4, No.5, pp.501-510, 1983.
    76. M. El-Gindy and L. Ilosvai, "Computer Simulation Study on a Vehicle's Directional Response in Some Severe Manoeuvres-Part 1: Rapid Lane-Change Manoeuvres", Int. Journal of Vehicle Design, Vol.4, No.4, pp.386-401, 1983.
    77. T. A. Nossier, M. El-Gindy and F.A. El-Said, "Tire Radial Properties", Journal of Periodica Polytechnica Transportation Engineering, Vol.10, No.1, pp.112-124, 1982.
    78. M. El-Gindy, "Theoretical Study of Disturbed Braking Manoeuvres", Journal of Periodic Polytechnica Transportation Engineering, Vol.10, No.1, pp.11-18, 1982.
    79. M. El-Gindy and L. Ilosvai, "An Experimental Investigation into Vehicle Response during Steering and Braking Manoeuvres", Int. Journal of Vehicle Design, Vol.2, No.4, pp.463-469, 1981.
    80. M. El-Gindy and L. Ilosvai, "Investigation of the Pulsating Braking", Journal of Periodic Polytechnica Transportation Engineering, Vol.8, No.1, pp.37-46, 1980.
    81. M. El-Gindy and L. Ilosvai, "Study in Vehicle Response during Steering and Braking Manoeuvres", Journal of Periodic Polytechnica Transportation Engineering, Vol.8, No.2, pp.161-167, 1980.
    82. M. El-Gindy and L. Ilosvai (1980) "Experimental Investigation in Vehicle Performance and Response during Nominal, Rectilinear Braking Manoeuvres", Journal of Periodic Polytechnica Transportation Engineering, Vol.8, No.1, pp.25-36, 1980.
    83. M. El-Gindy and L. Ilosvai, "Vehicle Stability in Braking Manoeuvres", Int. Journal of Vehicle Design, Vol. 1, No. 4, pp.231-238, 1980.

    REFEREED CONFERENCE PAPERS:

    1. Zeinab El-Sayegh, Moustafa El-Gindy, Inge Johansson and Fredrik Öijer “Modeling of Interaction Between Tire and Wet Surface Using Finite Element Analysis and Smoothed-Particle Hydrodynamics Technique”, SAE 2018 World Congress & Exhibition, Detroit, Michigan, USA, April 20-23, 2018. (Submitted)
    2. Zeinab El-Sayegh, Moustafa El-Gindy, Inge Johansson and Fredrik Öijer, “Soft Soil Modeling using SPH Technique for Tire-Soil Interaction”. ASME, DETC2018 conference, Quebec City, Canada (Submitted)
    3. Zeinab El-Sayegh, Moustafa El-Gindy, Inge Johansson and Fredrik Öijer, “Development of In-Plane Rigid Ring Truck Tire Model Over Flooded Surface using SPH Technique”. ASME, DETC2018 conference, Quebec City, Canada (Submitted)
    4. Amr Mohamed, Moustafa EI-Gindy, Jing Ren, Haoxiang Lang, “Optimal Collision-Free Path Planning for an Autonomous Multi-Wheeled Combat Vehicle”. ASME, 2017IDETC conference, Ohio, USA (August 5-8, 2017) (Accepted)
    5. Amr Mohamed, Jing Ren, Haoxiang Lang, Moustafa EI-Gindy, “Optimal Collision Free Path Planning for an Autonomous Articulated Vehicle with Two Trailers”. 2017 IEEE ICIT conference, Toronto, Canada (March 22-24, 2017)
    6. Kristian Lander, Moustafa El-Gindy, David Philipps, Inge Johansson and Fredrik Öijer “Determining the Vertical and Longitudinal First Mode of Vibrations of a Wide Base FEA Truck Tire”, SAE 2016 World Congress & Exhibition, Paper No. 15SS-0254, Detroit, Michigan, USA, April 20-23, 2016.
    7. Adam Reid, Moustafa El-Gindy, David Philipps, Inge Johansson, and Fredrik Öijer “Prediction of Tire Ground Interaction using FEA Truck Tire Model”, IAVSD 2015, London, UK, April 18th-20th, 2015.
    8. Shahram Shokouhfar1, Subhash Rakheja1, Moustafa El-Gindy “Verification of the Part-Composite Approach for Modeling the Multi-Layered Structure of a Rolling Truck Tire” LS-DYNA Conference 2015, Würzburg, Germany, July 15-17, 2015
    9. Adam Reid, Moustafa El-Gindy, David Philipps, Inge Johansson, and Fredrik Öijer “Development of a Wide Base Rigid Ring Tire Model for rigid Surface”, SAE 2015 World Congress & Exhibition, Paper No. 15M-0201, Detroit, Michigan, USA, April 8th 2015.
    10. Adam Cook, Moustafa El-Gindy, Ramachandra Sarathy and David Critchley “Dual Stage Front Underride Protection Devices (dsFUPDs): Multi-Objective Optimization”, SAE 2015 World Congress & Exhibition, Paper No. 15SS-0254, Detroit, Michigan, USA, April 8th 2015.
    11. Mehrsa Marjani, Moustafa El-Gindy, David Philipps, Inge Johansson and Fredrik Öijer “FEA Tire Modeling and Validation techniques”, DETC’15, 2015 ASME International Design Engineering Technical Conference, Boston, MA, USA, August 2-5, 2015.
    12. Steven Yang, Moustafa El-Gindy “Study of Occupant safety and airbag deployment time”, DETC’15, 2015 ASME International Design Engineering Technical Conference, Boston, MA, USA, August 2-5, 2015.
    13. Adam Reid, Moustafa El-Gindy, David Philipps, Inge Johansson, and Fredrik Öijer “Development of an Off‐Road Rigid Ring Model For Truck Tires In Soft Soil”, SAE 2014 World Congress & Exhibition, Paper No. 14M-0137, Detroit, Michigan, USA, April 8th 2014.
    14. Patrick Galipeau-Belair, Moustafa EL-Gindy, Sarathy Ramachandra, David Critchley and Srikanth Ghantae “Optimized Rigid Side Underride Protection Device Designs for Tractor-Trailers and Straight Trucks” SAE 2014 World Congress & Exhibition, Paper No. 14B-0086, Detroit, Michigan, USA, April 8th 2014.
    15. Todd MacDonald, Moustafa EL-Gindy, Sarathy Ramachandra, David Critchley and Srikanth Ghantae, “Dual Stage Front Underride Protection Devices (dsFUPDs): Development and Testing with Embedded Optimization”, SAE 2014 World Congress & Exhibition, Paper No. 14B-0027, Detroit, Michigan, USA, April 8th 2014.
    16. Hossam Ragheb, Moustafa El-Gindy and Hossam. Kishawy, "Torque Distribution Control for Multi-Wheeled Combat Vehicle”, Proceedings of the ASME 2014 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2014, August 17-20, 2014, Buffalo, New York, USA
    17. H. Ragheb, M. El-Gindy and H.A. Kishawy, "Multi-Wheeled Combat Vehicle Modeling On Rigid and Soft Terrain ", Proceedings of the 6th international Conference of National Defense Industry Association (NDIA), Tory, MI, August, 21-22, 2013

    H. Ragheb, M. El-Gindy and H.A. Kishawy, "Multi-Wheeled Combat Vehicle Tire Modeling on Rigid and Soft Terrain", Proceedings of the 15th ASAT-15 Conference, Military Technical College, Cairo, Egypt, 28-30 May, 2013.

    1. H. Ragheb, M. El-Gindy, H.A. Kishawy, (2013), “Multi-Wheeled Combat Vehicle Maneuverability on Rigid and Soft Terrain”, 15th International Conference on Aerospace Sciences and Aviation Technology, ASAT-15, Conference, Military Technical College, Cairo, Egypt, 28-30 May, 2013.
    2. H. Ragheb, M. El-Gindy, H. Kishawy, “Development of FEA Tire-Rigid Surface Interaction model    for Combat Vehicles” Proceedings of the 24th Canadian Congress of Applied Mechanics   CANCAM2013, Saskatchewan, SK, Canada, June 2-6, 2013.
    3. Todd MacDonald, Moustafa El-Gindy, Srikanth Ghantae, David Critchley, and Sarathy Ramachandra “A Comprehensive Review of Front Underride Protection Device Design and Evaluation” DETC’13, 2013 ASME International Design Engineering Technical Conference, Portland, OR, USA, August 6-9,  2013.
    4. R. Ali, M. El-Gindy, R. Dillon, David Philipps, Inge Johansson, and Fredrik Öijer “Prediction of Tire Ground Interaction using a FEA Truck Tire Model” DETC’13, 2013 ASME International Design Engineering Technical Conference, Portland, OR, USA, August 6-9, 2013.
    5. Ragheb, H., El-Gindy, M. and Kishawy, H., "Development of a Combat Vehicle FEA Tire Model for Off-Road Applications", SAE World Congress, SAE Technical Paper 2013-01-0632, Detroit, USA, 2013.
    6. R. Dillon , R. Ali, M. El-Gindy, David Philipps,  Inge Johansson, and Fredrik Öijer “Prediction of Tire Ground Interaction using a FEA Truck Tire Model” SAE World Congress, SAE Technical Paper 2013-01-0625, Detroit, USA, 2013.
    7. R. Ali, M. El-Gindy, R. Dillon, Mukesh Trivedi,  Inge Johansson, and Fredrik Öijer “Prediction of Tire Ground Interaction using a FEA Truck Tire Model” DETC’12, 2012 ASME International Design Engineering Technical Conference, Chicago, IL, USA, August 12-15, 2012.
    8. M. El-Gindy, A. Atahan and M. Castellanos “Development of Front Underride Protection Device” 23rd Canadian Congress of Applied Mechanics, Paper 132, June 6-9, Vancouver, BC, Canada, 2011.
    9. Ryan Lescoe, M. El-Gindy, Mukesh Trivedi,  Inge Johansson, and Fredrik Öijer “Off-road Tire-Soil Modeling using FEA and smooth particle hydrodynamics Techniques” DETC’11, 2011 ASME International Design Engineering Technical Conference, Montreal, Canada, August 31- September 5, 2011.
    10. Ryan Lescoe , M. El-Gindy,  Kevin Koudela,  Mukesh Trivedi,  Inge Johansson, and Fredrik Öijer “Off-road Tire-Soil Modeling using FEA and smooth particle hydrodynamics Techniques” DETC’10, 2010 ASME International Design Engineering Technical Conference, Montreal, Canada, August 12-16, 2010.
    11. Manuel Castellanos, Chris Fedishen, Moustafa El-Gindy and Ali Atahan,  “Design Methodology of Heavy Truck Front Underride Protection Devices (FUPD)” DETC’10, 2010 ASME International Design Engineering Technical Conference, Montreal, Canada, August 12-16, 2010.
    12. Jeff Slade and M. El-Gindy. “Modeling of Tire-Soil Interaction using Finite Element Analysis Method”, 6th Annual Penn State College of Engineering Research Symposium (CERS 2009), State College, Pennsylvania, March 24, 2009.
    13. Jeff Slade, Moustafa El-Gindy, Ryan Lescoe, Fredrik Öijer, Mukesh Trivedi, and Inge Johansson, “3-D FEA Truck Tire-Soft Terrain Modeling” DETC’09, 2009 ASME International Design Engineering Technical Conference, San Diego, CA, August 30 to September 2, 2009.
    14. Jeff Slade and M. El-Gindy. “Modeling of Tire-Soil Interaction using Finite Element Analysis Method”, 6th Annual Penn State College of Engineering Research Symposium (CERS 2009), State College, Pennsylvania, March 24, 2009.
    15. James Allen II, Moustafa El-Gindy and Kevin Koudela, “Development of Rigid Ring Quarter-Vehicle Model with an Advanced Road Profile for Durability and Ride Comfort Predictions” Proceedings of DETC’08, 2008 ASME International Design Engineering Technical Conference, Paper No. DETC2008-49031, New York, NY, August 3-6, 2008.
    16. James D’lorio, Joel Anstrom and Moustafa El-Gindy, “Comparison of Methods for Dynamic Yaw Control with Multiple Electric Motors: A Literature Review” DETC’08, 2008 ASME International Design Engineering Technical Conference, Paper No. DETC2008-49491, New York, NY, August 3-6, 2008.
    17. Ali O. Atahan and Moustafa El-Gindy, “Evaluation of Vertical Wall-to-Guardrail Transition” Proceedings of DETC’08, 2008 ASME International Design Engineering Technical Conference, Paper No. DETC2008-49088, August 3-6, 2008, New York, NY.
    18. J. Culp, M. El-Gindy and M. A. Haque, “Non-Intrusive Driver Drowsiness Monitoring Via Artificial Neural Networks” SAE Technical Paper 08B-435, SAE 2008 World Congress, Safety Test Methodology Session, Detroit, MI, April 14-17, 2008.
    19. Ali O. Atahan and Moustafa El-Gindy, “Evaluation of Vertical Wall-to-Uardrail Transition” Proceedings of DETC’08, 2008 ASME International Design Engineering Technical Conference, Paper No. DETC2008-49031, August 3-6, 2008, New York, NY.
    20. B. Shoffner (Presenter), J. Allen II, M. El-Gindy, M. Scanglione, and W. Evenson, Prediction of Kingpin/Fifthwheel Forces for Tractor-Semitrailer During Typical Operating Maneuvers,  2007 ASME International Design Engineering Technical Conferences, 9th International Conference on Advanced Vehicle and Tire Technologies, Las Vegas, NV, pp.1-15, September 4-7, 2007.
    21. J. Culp, M. El-Gindy and M. A. Hauge, “Non-Intrusive Driver Drowsiness Monitoring Via Artificial Neural Networks” SAE Technical Paper 08B-435 (Under Review) (2008)
    22. Allen II, J. (Presenter), Shoffner, B., El-Gindy, M., Trivedi, M., Johansson, I., and Öijer, F. “Prediction of Tire-Terrain Interaction using Finite Element Analysis Model”, 2007 ASME International Design Engineering Conferences, 9th International Conference on Advanced Vehicle and Tire Technologies (AVTT), Las Vegas, Nevada, pp. 1-12, September 4-7, 2007.
    23. S. Chae, M. El-Gindy, J. Allen II (Presenter), M. Trivedi, I. Johansson and F. Öijer, “Dynamic Response Predictions of Quarter Vehicle Models using a Finite Element Analysis and Rigid Ring Truck Tire Models”, 2006 ASME International Mechanical Engineering Congress, 8th Symposium on Advanced Vehicles Technologies, Chicago, IL pp.1-10, November 5–11, 2006.
    24. A. O. Atahan, G. Bonnin, M. El-Gindy and James Allen II (Presenter) “Development of a Draft Heavy Vehicle Rear Underride Guard Specification”, 2006 ASME International Mechanical Engineering Congress, 8th Symposium on Advanced Vehicles Technologies, Chicago, IL, pp.1-14, November 5–11, 2006.
    25.  M. D. Petersheim, S. P. Clewell, S. N. Brennan, C. M. LaJambe, M. El-Gindy and F. M. Brown, "Development of a Driving Simulator for Human-Vehicle Interaction Studies," Proceedings of the Ninth International Symposium on Heavy Vehicle Weights and Dimensions (ISHVWD), University Park, Pennsylvania, USA, June 23-29, 2006.
    26. S. Chae, M. El-Gindy (Presenter), M. Trivedi, I. Johansson and F. Öijer, “In-Plane and Out-of-Plane Dynamic Response Predictions of a Truck Tire”, 2005 ASME International Mechanical Engineering Congress, 7th Symposium on Advanced Vehicles Technologies, Orlando, FL, pp.1-11, November 11–16, 2005.
    27. A. O. Atahan , G. Bonnin and M. El-Gindy, “Design and Validation of a 30,000 kg Heavy Goods Vehicle using LS-DYNA”, 2005 ASME International Mechanical Engineering Congress, 7th Symposium on Advanced Vehicles Technologies, Orlando, FL, pp.1-17, November 11–16, 2005.
    28. M. J. Hillegass, J. G. Faller, M. S. Bounds and M. El-Gindy, “Vertical Dynamics Testing and Modeling of a Multi-Wheeled Combat Vehicle”, 2005 ASME International Mechanical Engineering Congress, 7th Symposium on Advanced Vehicles Technologies, Orlando, FL, pp.1-10, November 11–16, 2005.
    29. L. Elefteriadou (Presenter), D. Torbic and M. El-Gindy, “Rumble Streips for Lower Volume Roads with Narrow or Non-Existent Shoulders”, 2005 Annual Meeting and Exhibit, Institute of Transportation Engineers, Melbourne, VIC, Australia, pp.1-16, August 7-10, 2005.
    30. M. J. Hillegass, J. G. Faller, M. S. Bounds and M. El-Gindy, “Validation of the Directional Performance of Multi-Wheeled Combat Vehicle using Computer Simulation Models”, ASME International Mechanical Engineering Congress, Anaheim, 6th Symposium on Advanced Vehicles Technologies, CA, pp.1-9, November 13–19, 2004.
    31. S. Chae, M. El-Gindy (Presenter), M. Trivedi, I. Johansson and F. Öijer, “Dynamic Response Predictions of a Truck Tire Using Detailed Finite Element and Rigid Ring Models”, ASME International Mechanical Engineering Congress, 6th Symposium on Advanced Vehicles Technologies, Anaheim, CA, pp.1-11, November 13–19, 2004.
    32. D. Tobric (Presenter), L. Elefteriadou and M. El-Gindy, "Methodology for Evaluating Impacts of Rumble Strips on Bicyclists”, Transportation Research Board, TRB 83rd Annual Meeting, Washington DC, pp.1-15, January 11-16, 2003.                                  
    33. J. Abehshik, A. Atahan and M. El-Gindy (Presenter), “Rear-End Protection Device for Heavy Vehicles using LS-DYNA”, PTI 7th Annual Conference, Penn State University, State College, pp.1-9, July 16-19, 2003.
    34. A. Atahan, J. Abehshik and M. El-Gindy (Presenter), “A Rear-End Protection Device for Heavy Vehicles” ASME International Mechanical Engineering Congress and Exposition, 5th Symposium on “Advances in Vehicle Technologies”, Washington DC, pp.1- 9, November 16-21, 2003.
    35. R. Vance, N.J. Hiller (Presenter), M. El-Gindy and A. H. Hoskins, “Heavy Truck Simulators in Equipment Operator Training”, Society for Industrial and Organizational Psychology, 18th Annual Conference, Orlando, FL, pp.1-12, April 6-15, 2003.
    36. M. Henty (Presenter) and M. El-Gindy, “Virtual Rollover Tests Using Pam-Crash,” AMERI-PAM 2002 User Conference, Detroit, Michigan, pp.1-8, November 11-15, 2002.
    37. Y.P. Chang and M. El-Gindy (Presenter), “FEA Rotating Tire Modeling for Transient Response Simulation” ASME IMECE2002, 4th Symposium on “Advances in Vehicle Technologies”, New Orleans, Louisiana, pp.1-9, November 17-22, 2002.
    38. S.B. Inman, D.C. Haworth and M. El-Gindy (Presenter), “Integration of WAVE and SUPERVISOR Simulations for Optimization of a Hybrid Electric Sport Utility Vehicle” 2002 SAE Powertrain and Fluid Systems Conference & Exposition, pp.1-11, October 21-24, 2002.
    39. A. Hoskins, M. El-Gindy (Presenter), R. Vance, N. Hiller and C. C. Goodhart, “Truck Driving Simulator Effectiveness”, ASME IMECE2002, 4th Symposium on “Advances in Vehicle Technologies, Paper No. 32964, Louisiana, New Orleans, pp.1-7, November 14-19, 2002.
    40. A. Hoskins, M. El-Gindy, R. Vance, N. Hiller (Presenter) and C. C. Goodhart, “Truck Driving Simulator Performance Evaluation”, DSC2002, Paris, France, pp.1-11, September 10-16, 2002.
    41. M. El-Gindy (Presenter) and S. Chae, “Prediction of Standing Waves and Steering Characteristics of a Small Race Tire.” 21st annual meeting and conference on Tire Science and Technology, Akron, Ohio, pp.1-14, September 9-10, 2002.
    42. D. Tobric (Presenter), L. Elefteriadou and M. El-Gindy, "Development of More Bicycle-Friendly Rumble Strip Configuration", Transportation Research Board, TRB 80th Annual Meeting, Washington, D.C., pp.1-12, January 7-11, 2001.
    43. S. Chae (Presenter), Y. P. Chang and M. El-Gindy, “Prediction and Analysis of Standing Wave Phenomena of a Racing Car Tire,” International Conference Multidisciplinary Design, CSME-MDE, Concordia University, Montreal, Quebec, Canada, pp.1-13, November 21-22, 2001.
    44. S. Lewis and M. El-Gindy (Presenter), “Nonlinear Active Rollover Prevention Control Strategies for a 5-Axle Tractor/Semitrailer,” ASME International Mechanical Engineering Congress and Exposition, 3ed Symposium on “Advances in Vehicle Technologies”, NY, pp.1-8, November 11-16, 2001.
    45. Y.P. Chang (Presenter), M. El-Gindy and D.A. Streit, “Prediction of Radial-Ply Tire’s Vertical Free Vibration Resonance Using Pam-Shock,” AMERI-PAM 2001 User Conference, Detroit, Michigan, pp.1-10, November  11-15, 2001.
    46. Y.P. Chang, M. El-Gindy (Presenter) and D. A. Streit, "Prediction of Tire Transient Response Using PAM-SHOCK," presented in seminar on “Simulating Rotating Tires on the Road”, ESI North America, Akron, Ohio, pp.1-12, October 9-10, 2000.                            
    47. Y.P. Chang (Presenter), M. El-Gindy and D. A. Streit, "Prediction of Tire Standing Waves Using PAM-SHOCK," AMERI-PAM 2000 User Conference, Detroit, Michigan, pp.1-21, Oct. 24-25, 2000.
    48. Z. Jiang, M. El-Gindy (Presenter) and D.A. Streit, “Ride Comfort of Five-Axle Tractor/Semitrailer,” ASME International Mechanical Engineering Congress and Exposition, 2nd Symposium on “Advances in Vehicle Technologies", Orlando, pp.9-18, November 14-19, 2000.
    49. M. El-Gindy (Presenter), H. Lewis and S. Lewis, “Development of Tire/Pavement Contact-Stress Model Based on Artificial Neural Networks”, ASME Symposium on “Innovations in Vehicle Design and Development”, DE-Vol. 101pp.25-34, November 14-19, 1999.
    50. J. Xiao, B. Kulakowski (Presenter) and M. El-Gindy, "Prediction of the Wet Pavement Accidents using Fuzzy Logic", Engineering Foundations Conference, Poland, pp.1-15, June 11-17, 1999.
    51. D. Kinikowski and M. El-Gindy (Presenter), "An Overview of the Federal Transit Administration's Bus Testing Program", SAE Paper No. 982774, pp.1-11, September 5-11, 1998.
    52. E. Fekpe (Presenter) and M. El-Gindy “The Role of Less Common Truck Configurations", 5th International Symposium on Heavy Vehicle Weights and Dimensions”, Australia, pp.1-9, March 29 to April 2, 1998..
    53. M. El-Gindy, N. Mrad, X. Tong and B.T. Kulakowski (Presenter), “Rearward Amplification Control of A Truck/Full-Trailer”, International Federation on Automatic Control (IFAC) Conference and Workshop, Symposium on Advances in Automotive Control, Loudonville, Ohio, pp7-15, February 26 to March 1, 1998.
    54. M. El-Gindy (Presenter), J. Preston-Thomas and X. Tong, "Stability and Braking Performance of a Bus/Pony Trailer Vehicle", SAE International Truck and Bus Meeting and Exposition, Detroit, MI, pp.1-16, October. 13-15, 1996.
    55. X. Tong, B. Tabarrok and M. El-Gindy (Presenter), "Evaluation of the Dynamic Performance of Log Truck Configurations", Symposium on Advanced Transportation Systems, CSME Forum'96, Hamilton, Ontario, Canada, Vol. 2, pp.111-123, May 23-29, 1996.
    56. E. S. K. Fekpe and M. El-Gindy (Presenter), "Influence of Trailer Tandem-Axle Versus Tridem-Axle on Pavement Damage and Dynamic Performance", ASME Winter Annual Meeting, 5th Symposium on Transportation Systems, Atlanta, GA, pp.1-9, November 5-10, 1996.
    57. X. Tong, B. Tabarrok and M. El-Gindy (Presenter), "Computer-Based Analysis of the Dynamic Performance of Log Hauling Trucks", SAE International Truck and Bus Meeting and Exposition, Paper No. 952637, pp. 55-65, November 13-15, 1995.
    58. J. Preston-Thomas and M. El-Gindy (Presenter), "Path Compliance in Lane-Change Tests Designed to Evaluate Rearward Amplification", Fourth International Symposium on Heavy Vehicle Weights and Dimensions, Ann Arbour, Michigan, pp.473-482, June 5-10, 1995.
    59. M. El-Gindy (Presenter), J. Preston-Thomas and L. Palkovics, "Computer Simulation Modelling and Field Tests of a Canadian Logging Truck: Tractor/Pole-Trailer", The 12th Symposium on Engineering and Applied Mechanics (EA), McGill University, Montreal, pp. 383-395, June27-29, 1994.
    60. L. Palkovics, M. El-Gindy (Presenter) and H.B. Pacejka, "Application of Neural Networks to Tire Modelling for Vehicle Simulation", Third Conference on Vehicle/Road and Vehicle/Bridge Interaction, the Netherlands, pp.1-14, June 5-10, 1994.
    61. L. Palkovics and M. El-Gindy (Presenter), "Active Safety Control for Heavy Vehicles", Third Conference on Vehicle/Road and Vehicle/Bridge Interaction, the Netherlands, pp.1-12, June 5-10, 1994.
    62. M. El-Gindy (Presenter) and L. Palkovics, "Design of Active Unilateral Brake Control System for Five-Axle Tractor Semitrailer based on Sensitivity Analysis", 6th AMME Conference, Military Technical College, Cairo, Egypt, pp.665-688, May 22-28, 1994.
    63. L. Palkovics and M. El-Gindy (Presenter), "Examination of Different Control Strategies of Heavy-Vehicle Performance", ASME Winter Annual Meeting, Third Symposium on Advanced Automotive Technologies, DSC-Vol.52, Louisiana, pp.349-362, November 8-13, 1993.
    64. M. El-Gindy (Presenter), "An Overview of Performance Measures for Heavy Commercial Vehicles in North America", X. International Conference on Road Transport and Traffic Safety, Budapest, Hungary, pp.1-11, September 16-17, 1993.
    65. M. El-Gindy (Presenter), "The Use of Heavy Vehicle Performance Measures for Design and Regulation", ASME Winter Annual Meeting, Symposium on Transportation Systems, DSC-Vol. 44, Anaheim, California, pp.367-382, November 8-13, 1992.
    66. J. H. F. Woodrooffe and M. El-Gindy (Presenter), "Application of Handling and Roll Stability Measures for Determining a Suitable Tractor Wheelbase", Third International Symposium on Vehicle Weights and Dimensions, Queens' College, Cambridge, UK, pp.30-35, June 28-July 2, 1992.
    67. J. Preston-Thomas and M. El-Gindy (Presenter), "Static Rollover Thresholds of Heavy Vehicles", CSME Forum, Symposium on Transportation Technology, Montreal, Canada, pp.946-951, June 1-4, 1992.
    68. M. El-Gindy (Presenter),  J.H.F. Woodrooffe and D. M. White, "Evaluation of the Dynamic Performance of Heavy Commercial Vehicles", ASME Annual Meeting, Symposium on Advanced Automotive Technology, DE-Vol. 40, Atlanta, Georgia, pp.183-198, December 1-6, 1991.
    69. M. El-Gindy (Presenter) and J.H.F. Woodrooffe, "The Effects of Tractor Parameter Variations on the Dynamic Performance of B-Train Double", ASME Annual Meeting, Symposium on Advanced Automotive Technology, AMD Vol.108, Dallas, Texas, pp.99-108, November 25-30, 1990.
    70. M. El-Gindy (Presenter)  and J. H. F. Woodrooffe, "Dynamic Performance of Logging Trucks", 10th Symposium on Engineering Applications of Mechanics, EA '90, Kingston, Ontario, Canada, pp.403-407, May 27-30,1990.
    71. M. El-Gindy (Presenter), "Directional Behaviour of a Log- Hauling Truck with Tridem-Axle Tractor", CSME Mechanical Engineering Forum, Symposium on Transportation Technology, Toronto, Ontario, Canada, Vol. 4, pp.349-354, June 3-9, 1990.
    72. J. H. Woodrooffe, P. LeBlanc (Presenter) and M. El-Gindy, "Self- Steering Axles and the Commercial Vehicle". The Third International IRTENZ Seminar, Christchurch, Canada, pp.1-12, August 1-3, 1989.
    73. J. Woodrooffe, P. LeBlanc and M. El-Gindy (Presenter),  "Development of Design and Operational Guidelines for the C-Converter Dolly", Second International Symposium on Heavy Vehicle Weights and Dimensions, Vol. 1, Kelowna, B.C., Canada, pp.1-24, June 18-22, 1989.
    74. P.A. LeBlanc, M. El-Gindy (Presenter) and J. H. F. Woodrooffe, "Self-Steering Axles: Theory and Practice", SAE Future Transportation Technology Conference and Exposition, Vancouver, BC, Canada, SAE Paper No. 891633, pp.1-15, July 22-17, 1989.
    75. M. El-Gindy (Presenter), "Frequency Response of a Three-Axle Truck to Sinusoidal Steering Input", Third International Conference on Theoretical & Applied Mechanics, Cairo, Egypt, pp.1-9, November 14-17, 1988.
    76. M. El-Gindy (Presenter), M. A. Saleh and A. M. Saad, "Modelling of a Load-Sensing Brake Proportioning Valve", Third Int. AME Conference, Military College, Cairo, Egypt, Section 9, MA-6, pp.65-77, April 12-14, 1988.
    77. M. El-Gindy (Presenter), M.A. Saleh and A.M. Saad, "Brake Proportional to Load", Third Int. AME Conference Military Technical College, Section 9, MA-5, pp.53-63, April 12-14, 1988.
    78. A. O. Abdel Halim, W. Phang and M. El-Gindy (Presenter) "Extending the Service Life of Asphalt Pavements Through the Prevention of Construction Cracks", TRB Annual Meeting, Washington, D.C., Paper No. 870405, pp.1-8, January 11-14, 1988.
    79. M. El-Gindy (Presenter) and S. H. Kasin, "Transient Off-Tracking of Some Articulated Vehicles", First Int. Symposium on Defence Technology (SDT), National Organization of Military Production, Vol. 2, Cairo, pp.119-144, November 10-11, 1987.
    80. M. El-Gindy (Presenter) and J. Y. Wong, "Steady-State Steering Response of Articulated Vehicle with a Multi-Axle Forced Steering Dolly", International Congress & Exposition, Detroit, Michigan, SAE Paper No. 850537, pp.1-13, June 12-17, 1985.
    81. M. El-Gindy (Presenter) and J. Y. Wong, "Steering Response of Articulated Vehicles in Steady Turns", Truck & Bus Meeting and Exposition, Chicago, Illinois, SAE Paper No. 852335, pp.1-21, December 9-12, 1985.
    82. 100. M. El-Gindy (Presenter), T. A. Nossier and A. M. Hussein (1885) "Tire Free Drop Analysis", Second International Conference on Theoretical and Applied Mechanics, National Research Council Egypt, Cairo, Egypt, pp.1-14, March 11-13, 1985.

    INDUSTRIAL/GOVERNMENT RESEARCH REPORTS:

    1. M. El-Gindy and Brett Russell, "Task 11: Review the New Design of the Rear Axle Steering Multi-Wheeled Combat Vehicle", submitted to GDLS-C, by University of Ontario Institute of Technology, Oshawa, Canada, July 20, 2017. L. Dababneh, H. Ragheb and M. El-Gindy, "Evaluation of Dynamic Performance Measures for the 10-Axle King B-Train and 7-Axle Tractor Semitrailer Configurations" submitted to Yukon Energy Corporation, by University of Ontario Institute of Technology , Oshawa, Canada, February 9 2015.​​

      L. Dababneh and M. El-Gindy, "Evaluation of Dynamic Performance Measures for the Modified 10-Axle King B-Train Configuration" submitted to Yukon Energy Corporation, by University of Ontario Institute of Technology , Oshawa, Canada, November 24 2015.​​ L. Dababneh, H. Ragheb and M. El-Gindy, "Evaluation of Dynamic Performance Measures for the 10-Axle King B-Train and 7-Axle Tractor Semitrailer Configurations" submitted to Yukon Energy Corporation, by University of Ontario Institute of Technology , Oshawa, Canada, February 9 2015.​​ L. Dababneh, H. Ragheb and M. El-Gindy, "Evaluation of Dynamic Performance Measures for the 10-Axle King B-Train and 7-Axle Tractor Semitrailer Configurations" submitted to Yukon Energy Corporation, by University of Ontario Institute of Technology , Oshawa, Canada, February 9 2015.​​ L. Dababneh, H. Ragheb and M. El-Gindy, "Evaluation of Dynamic Performance Measures for the 10-Axle King B-Train and 7-Axle Tractor Semitrailer Configurations" submitted to Yukon Energy Corporation, by University of Ontario Institute of Technology , Oshawa, Canada, February 9 2015.​​ L. Dababneh, H. Ragheb and M. El-Gindy, "Evaluation of Dynamic Performance Measures for the 10-Axle King B-Train and 7-Axle Tractor Semitrailer Configurations" submitted to Yukon Energy Corporation, by University of Ontario Institute of Technology , Oshawa, Canada, February 9 2015.​​ L. Dababneh, H. Ragheb and M. El-Gindy, "Evaluation of Dynamic Performance Measures for the 10-Axle King B-Train and 7-Axle Tractor Semitrailer Configurations" submitted to Yukon Energy Corporation, by University of Ontario Institute of Technology , Oshawa, Canada, February 9 2015.​​
    2. M. El-Gindy, L. Dababneh and Brett Russell "Evaluation of Dynamic Performance Measures for BC Logging Trucks" Progress Report 1, submitted to BC Minster of Transportation., by University of Ontario Institute of Technology, Oshawa, Canada, February 5 2017.
    3. M. El-Gindy, Brett Russell and L. Dababneh "Evaluation of Dynamic Performance Measures for BC Logging Trucks" Progress Report 2, submitted to BC Minster of Transportation., by University of Ontario Institute of Technology, Oshawa, Canada, March 5 2017.
    4. Moustafa El-Gindy, Adam Reid, "Phase XIII, Task 1: Prediction of Steering Characteristics of the XONE XDA Wide Base Tire on Rigid Road", Technical Report submitted to Volvo Group Truck Technology, pp 1-8, April 15, 2016.
    5. L. Dababneh and M. El-Gindy, "Evaluation of Dynamic Performance Measures for the 10-Axle B-Train" submitted to TSD Holding Inc., by University of Ontario Institute of Technology, Oshawa, Canada, February 5 2016.
    6. P. D'Urso and M. El-Gindy, "Task 9: Suspension and Rear Axle Steering Review of a Multi-Wheeled Combat Vehicle", submitted to GDLS-C, by University of Ontario Institute of Technology, Oshawa, Canada, May 2015. L. Dababneh, H. Ragheb and M. El-Gindy, "Evaluation of Dynamic Performance Measures for the 10-Axle King B-Train and 7-Axle Tractor Semitrailer Configurations" submitted to Yukon Energy Corporation, by University of Ontario Institute of Technology , Oshawa, Canada, February 9 2015.​​

      L. Dababneh and M. El-Gindy, "Evaluation of Dynamic Performance Measures for the Modified 10-Axle King B-Train Configuration" submitted to Yukon Energy Corporation, by University of Ontario Institute of Technology , Oshawa, Canada, November 24 2015.​​ L. Dababneh, H. Ragheb and M. El-Gindy, "Evaluation of Dynamic Performance Measures for the 10-Axle King B-Train and 7-Axle Tractor Semitrailer Configurations" submitted to Yukon Energy Corporation, by University of Ontario Institute of Technology , Oshawa, Canada, February 9 2015.​​ L. Dababneh, H. Ragheb and M. El-Gindy, "Evaluation of Dynamic Performance Measures for the 10-Axle King B-Train and 7-Axle Tractor Semitrailer Configurations" submitted to Yukon Energy Corporation, by University of Ontario Institute of Technology , Oshawa, Canada, February 9 2015.​​ L. Dababneh, H. Ragheb and M. El-Gindy, "Evaluation of Dynamic Performance Measures for the 10-Axle King B-Train and 7-Axle Tractor Semitrailer Configurations" submitted to Yukon Energy Corporation, by University of Ontario Institute of Technology , Oshawa, Canada, February 9 2015.​​ L. Dababneh, H. Ragheb and M. El-Gindy, "Evaluation of Dynamic Performance Measures for the 10-Axle King B-Train and 7-Axle Tractor Semitrailer Configurations" submitted to Yukon Energy Corporation, by University of Ontario Institute of Technology , Oshawa, Canada, February 9 2015.​​ L. Dababneh, H. Ragheb and M. El-Gindy, "Evaluation of Dynamic Performance Measures for the 10-Axle King B-Train and 7-Axle Tractor Semitrailer Configurations" submitted to Yukon Energy Corporation, by University of Ontario Institute of Technology , Oshawa, Canada, February 9 2015.​​
    7. L. Dababneh, H. Ragheb and M. El-Gindy, "Evaluation of Dynamic Performance Measures for the 10-Axle King B-Train and 7-Axle Tractor Semitrailer Configurations" submitted to Yukon Energy Corporation, by University of Ontario Institute of Technology, Oshawa, Canada, February 9 2015. ​​
    8. L. Dababneh and M. El-Gindy, "Evaluation of Dynamic Performance Measures for the Modified 10-Axle King B-Train Configuration" submitted to Yukon Energy Corporation, by University of Ontario Institute of Technology, Oshawa, Canada, November 24 2015.​​
    9. P. D'Urso and M. El-Gindy, "Task 6.2 and 6.3: Suspension Development Collaboration", submitted to GDLS-C, by University of Ontario Institute of Technology, Oshawa, Canada, June 2015.
    10. P. D'Urso and M. El-Gindy, "Task 7: ADAMS Driver Model Development", submitted to GDLS-C, by University of Ontario Institute of Technology, Oshawa, Canada, September 2015.
    11. P. D'Urso, A. Odrigo and M. El-Gindy, "Task 10: Torque Vectoring for ELAV", submitted to GDLS-C, by University of Ontario Institute of Technology, Oshawa, Canada, November 2015. P. D'Urso and M. El-Gindy, "Task 9: Suspension and Rear Axle Steering Review of a Multi-Wheeled Combat Vehicle", submitted to GDLS-C, by University of Ontario Institute of Technology, Oshawa, Canada, May 2015.
    12. P. D'Urso and M. El-Gindy, "Task 6.2 and 6.3: Suspension Development Collaboration", submitted to GDLS-C, by University of Ontario Institute of Technology, Oshawa, Canada, June 2015.
    13. P. D'Urso and M. El-Gindy, "Task 7: ADAMS Driver Model Development", submitted to GDLS-C, by University of Ontario Institute of Technology, Oshawa, Canada, September 2015.
    14. P. D'Urso, A. Odrigo and M. El-Gindy, "Task 10: Torque Vectoring for ELAV", submitted to GDLS-C, by University of Ontario Institute of Technology, Oshawa, Canada, November 2015. P. D'Urso and M. El-Gindy, "Task 9: Suspension and Rear Axle Steering Review of a Multi-Wheeled Combat Vehicle", submitted to GDLS-C, by University of Ontario Institute of Technology, Oshawa, Canada, May 2015.
    15. P. D'Urso and M. El-Gindy, "Task 6.2 and 6.3: Suspension Development Collaboration", submitted to GDLS-C, by University of Ontario Institute of Technology, Oshawa, Canada, June 2015.
    16. P. D'Urso and M. El-Gindy, "Task 7: ADAMS Driver Model Development", submitted to GDLS-C, by University of Ontario Institute of Technology, Oshawa, Canada, September 2015.
    17. P. D'Urso, A. Odrigo and M. El-Gindy, "Task 10: Torque Vectoring for ELAV", submitted to GDLS-C, by University of Ontario Institute of Technology, Oshawa, Canada, November 2015. P. D'Urso and M. El-Gindy, "Task 9: Suspension and Rear Axle Steering Review of a Multi-Wheeled Combat Vehicle", submitted to GDLS-C, by University of Ontario Institute of Technology, Oshawa, Canada, May 2015.
    18. P. D'Urso and M. El-Gindy, "Task 6.2 and 6.3: Suspension Development Collaboration", submitted to GDLS-C, by University of Ontario Institute of Technology, Oshawa, Canada, June 2015.
    19. P. D'Urso and M. El-Gindy, "Task 7: ADAMS Driver Model Development", submitted to GDLS-C, by University of Ontario Institute of Technology, Oshawa, Canada, September 2015.
    20. P. D'Urso, A. Odrigo and M. El-Gindy, "Task 10: Torque Vectoring for ELAV", submitted to GDLS-C, by University of Ontario Institute of Technology, Oshawa, Canada, November 2015.
    21. Moustafa El-Gindy, Adam Reid, "Phase XIII, Task 2: Prediction of Rigid Ring Model Parameters for the XONE XDA Wide Base Tire on Rigid Road", Technical Report submitted to Volvo Group Truck Technology, pp 1-30, February, 2015.
    22. K. Lardner, M. Mehrsa and M. El-GIndy, "Phase XVII (PO#495784-NA1): Task 1 (Q1-Q2-Q3-2015) - FEW Rollover Model," submitted to Volvo, by University of Ontario Institute of Technology, Oshawa, Canada, August 2015.
    23. K. Lardner and M. El-Gindy, "Phase XVII (PO#495783-NA1): Task 2, Part 1 (Q4-2015) - Calspan Measurements," submitted to Volvo, by University of Ontario Institute of Technology, Oshawa, Canada, ​September 2015.
    24. K. Lardner, M. Mehrsa and M. El-Gindy, "Revisiting Phase XI: Additional Information on the Sensitivity Analysis of Rolling Resistance on Hard Surface," submitted to Volvo, by University of Ontario Institute of Technology, Oshawa, Canada, November 2015.​​
    25. M. El-Gindy, M. Marjani, "Phase XVII (PO#495784-NA1) Task 2: Model and Validate the Soft soil (Dry Sand) and Predict the X ONE D Wide Base Tire Rolling Resistance", Submitted to Volvo Group Trucks Technology, by University of Ontario Institute of Technology, Oshawa, Canada, November 12, 2015.
    26. M. El-Gindy, M. Marjani, "Phase XII: Task 6 Effect of Driving Torque on Rolling Resistance Coefficient", Submitted to Volvo Group Trucks Technology, by University of Ontario Institute of Technology, Oshawa, Canada , February 26, 2015.
    27. P. D'Urso and M. El-Gindy, "Task 9: Suspension and Rear Axle Steering Review of a Multi-Wheeled Combat Vehicle", submitted to GDLS-C, by University of Ontario Institute of Technology, Oshawa, Canada, May 2015.
    28. P. D'Urso and M. El-Gindy, "Task 6.2 and 6.3: Suspension Development Collaboration", submitted to GDLS-C, by University of Ontario Institute of Technology, Oshawa, Canada, June 2015.
    29. P. D'Urso and M. El-Gindy, "Task 7: ADAMS Driver Model Development", submitted to GDLS-C, by University of Ontario Institute of Technology, Oshawa, Canada, September 2015.
    30. P. D'Urso, A. Odrigo and M. El-Gindy, "Task 10: Torque Vectoring for ELAV", submitted to GDLS-C, by University of Ontario Institute of Technology, Oshawa, Canada, November 2015. P. D'Urso and M. El-Gindy, "Task 9: Suspension and Rear Axle Steering Review of a Multi-Wheeled Combat Vehicle", submitted to GDLS-C, by University of Ontario Institute of Technology, Oshawa, Canada, May 2015.
    31. P. D'Urso and M. El-Gindy, "Task 6.2 and 6.3: Suspension Development Collaboration", submitted to GDLS-C, by University of Ontario Institute of Technology, Oshawa, Canada, June 2015.
    32. P. D'Urso and M. El-Gindy, "Task 7: ADAMS Driver Model Development", submitted to GDLS-C, by University of Ontario Institute of Technology, Oshawa, Canada, September 2015.
    33. P. D'Urso, A. Odrigo and M. El-Gindy, "Task 10: Torque Vectoring for ELAV", submitted to GDLS-C, by University of Ontario Institute of Technology, Oshawa, Canada, November 2015. P. D'Urso and M. El-Gindy, "Task 9: Suspension and Rear Axle Steering Review of a Multi-Wheeled Combat Vehicle", submitted to GDLS-C, by University of Ontario Institute of Technology, Oshawa, Canada, May 2015.
    34. P. D'Urso and M. El-Gindy, "Task 6.2 and 6.3: Suspension Development Collaboration", submitted to GDLS-C, by University of Ontario Institute of Technology, Oshawa, Canada, June 2015.
    35. P. D'Urso and M. El-Gindy, "Task 7: ADAMS Driver Model Development", submitted to GDLS-C, by University of Ontario Institute of Technology, Oshawa, Canada, September 2015.
    36. P. D'Urso, A. Odrigo and M. El-Gindy, "Task 10: Torque Vectoring for ELAV", submitted to GDLS-C, by University of Ontario Institute of Technology, Oshawa, Canada, November 2015. P. D'Urso and M. El-Gindy, "Task 9: Suspension and Rear Axle Steering Review of a Multi-Wheeled Combat Vehicle", submitted to GDLS-C, by University of Ontario Institute of Technology, Oshawa, Canada, May 2015.
    37. P. D'Urso and M. El-Gindy, "Task 6.2 and 6.3: Suspension Development Collaboration", submitted to GDLS-C, by University of Ontario Institute of Technology, Oshawa, Canada, June 2015.
    38. P. D'Urso and M. El-Gindy, "Task 7: ADAMS Driver Model Development", submitted to GDLS-C, by University of Ontario Institute of Technology, Oshawa, Canada, September 2015.
    39. P. D'Urso, A. Odrigo and M. El-Gindy, "Task 10: Torque Vectoring for ELAV", submitted to GDLS-C, by University of Ontario Institute of Technology, Oshawa, Canada, November 2015.
    40. Moustafa El-Gindy, Adam Reid and Ranvir Dhillon, “Phase XII, Task 1: Development of Off-Road Rigid Ring Model”, Technical Report submitted to Volvo Group Truck Technology, pp 1-34, August 5, 2013.
    41. Moustafa El-Gindy, Adam Reid and Ranvir Dhillon, “Dual Tire /Wide Base Tire, RRC Equation” Task 2: Phase XII”, Technical Report submitted to Volvo Group Truck Technology, pp 1-8, April 15, 2013.
    42. Moustafa El-Gindy, Rustam Ali and Ranvir Dhillon, “3-D FEA Truck Tire-Soft Terrain Modeling: Phase X – Task 4: Comparison between FEA and SPH soil modeling”, Technical Report submitted to Volvo 3P, pp 1-11, February 15, 2013.
    43. Moustafa El-Gindy, Rustam Ali and Ranvir Dhillon, “3-D FEA Truck Tire-Soft Terrain Modeling: Phase XI – Task 6: Rolling Resistance Data for tire Design Parameters”, Technical Report submitted to Volvo 3P, pp 1-18, December 15, 2012.
    44. Moustafa El-Gindy, Rustam Ali and Ranvir Dhillon, “SENSITIVITY ANALYSIS OF ROLLING RESISTANCE ON HARD SURFACE”, Technical Report submitted to Volvo Group Trucks Technology, pp 1-11, January 15, 2012.
    45. Moustafa El-Gindy, Rustam Ali and Ranvir Dhillon, “3-D FEA Truck Tire-Soft Terrain Modeling: Phase X – Task 4 - ADVANCED SOIL-MODELING”, Technical Report submitted to Volvo Group Trucks Technology, pp 1-13, March 29, 2012.
    46. Moustafa El-Gindy, Rustam Ali and Ranvir Dhillon, “3-D FEA Truck Tire-Soft Terrain Modeling: Phase X – Task 4: ADVANCED SOIL-MODELING”, Technical Report submitted to Volvo Group Trucks Technology, pp 1-9, April 20, 2012.
    47. Moustafa El-Gindy, Rustam Ali and Ranvir Dhillon, “3-D FEA Truck Tire-Soft Terrain Modeling: Phase X – Task 4: ADVANCED SOIL-MODELING – SOIL TYPE: CLAYEY SOIL (THAILAND)”, Technical Report submitted to Volvo Group Trucks Technology, pp 1-12, June 29, 2012.
    48. Moustafa El-Gindy, Rustam Ali and Ranvir Dhillon, “3-D FEA Truck Tire-Soft Terrain Modeling: Phase XI – Task 6: Rolling Resistance Data for Tire Design Parameters”, Technical Report submitted to Volvo Group Trucks Technology, pp 1-4, December 21, 2012.
    49. Moustafa El-Gindy, Rustam Ali and Ranvir Dhillon, “3-D FEA Truck Tire-Soft Terrain Modeling: Phase X – Task 4: Rolling Resistance Investigation using 3-4 Groove and RHD-Truck Tire”, Technical Report submitted to Volvo 3P, pp 1-11, May 23, 2012.
    50. Moustafa El-Gindy, Rustam Ali and Ranvir Dhillon, “3-D FEA Truck Tire-Soft Terrain Modeling: Phase XI - Calculation of Enveloping Characteristics”, Technical Report submitted to Volvo 3P, pp 1-11, February 15, 2011.
    51. Moustafa El-Gindy, Rustam Ali and Ranvir Dhillon, “3-D FEA Truck Tire-Soft Terrain Modeling: Phase XI - Rolling Resistance Investigation using 3-Groove Truck Tire”, Technical Report submitted to Volvo 3P, pp 1-11, May 23, 2011.
    52. Moustafa El-Gindy, Brent Shoffner, Jonathan Culp, Jeffery Slade, and Jacob Eyth.  "US Navy Kingpin Study:  Development and Validation of Tractor-Semitrailer Finite Element Analysis Model," Technical Memorandum, File No. 07-023, Sponsored by the US Navy Strategic Systems Program Office, February 8, 2008. 
    53. Petersheim, M. D., Clewell, S. P., and El-Gindy, M. "Real Time Simulation and Advanced 3D Image Generation and Integration with Vehicle Dynamics Models," Technical Report 06-003, the Applied Research Laboratory, Penn State, April 14, 2006.
    54. Moustafa El-Gindy, Seokyong Chae, and Abehshik S. Joshii “US Navy Heavy Truck Examination of Kingpin and Fifth Wheel Loads for Tractor-Semitrailer,” Technical Memorandum, File No. 04-073, Sponsored by the US Navy Strategic Systems Program Office, September 5, 2004.
    55. Moustafa El-Gindy, Steve Fleishut, Seokyong Chae, and Abehshik S. Joshii, “Kingpin Loads of US Navy Truck” Technical Memorandum, File No. 04-077, Sponsored by the US Navy Strategic Systems Program Office, November 15, 2004.
    56. Moustafa El-Gindy, Seokyong Chae, and Abehshik S. Joshii “Modeling and Validation of Stryker Weapon System and HMMWV Using TruckSim and CarSim” Technical Memorandum, File No. 04-068, Sponsored by the US Army Aberdeen Test Center, November 8, 2004.
    57. R. Vance, M. Renz, M. El-Gindy, A. Hoskins and N. Hiller, “Mitigating PennDOT Equipment Accidents”, Final Report, Part 1, Sponsored by Pennsylvania Department of Transportation and Vance & Renz, LLC, pp.1-111, October 7, 2004 (Contributing Author)(Co-P.I.)
    58. R. Vance, M. Renz, M. El-Gindy, A. Hoskins, N. Hiller, B. Cordeiro and A, Joshi, “Mitigating PennDOT Equipment Accidents”, Final Report, Part 2: Literature Review, Sponsored by Pennsylvania Department of Transportation and Vance & Renz, LLC, pp1-130, September 24, 2004. (Contributing Author) (Co-P.I.)
    59. Kulakowski, M. El-Gindy, A. Hoskins and S. Chae, “Transit Bus and Motor Coach Axle Weight Study” Final Report, No. PTI-2003-01, Pennsylvania Transportation institute, the Penn State University, sponsored by Penn DOT, pp.1-64, July 2002.  (Co-P.I.)
    60. R. Vance, M. El-Gindy, A. Hoskins and N. Hiller, “Simulator Training Evaluation Program,” Final Report, No. PTI-2002-06, Pennsylvania Transportation institute, the Penn State University, sponsored by Penn DOT, pp.1-74, May 2002.  (P.I.)
    61. L. Elefteriadou, M. El-Gindy and D. Tobric, “Rumble Strips for Lower Volume Roads with Narrow or Non-Existent Shoulders,” Final Report, No. PTI-2002-03, Pennsylvania Transportation institute, the Penn State University, sponsored by Penn DOT, pp.1-62, September 2001. (Contributing Author) (Co-P.I.)
    62. M. El-Gindy and S. Chae, "Examination of Steering Wheel Lateral Saturation of DaimlerChrysler Transport Trucks", Final Report, No. PTI-2001-21, Pennsylvania Transportation institute, The Penn State University, sponsored DaimlerChrysler Transport Inc., pp.1-56, January 2001.  (P.I.)
    63. L. Elefteriadou, M. El-Gindy and D. Tobric, "Bicycle-Friendly Shoulder Rumble Strips,” Final Report, No. PTI-2K15, Pennsylvania Transportation institute, The Penn State University, sponsored by Penn DOT, Report No. PTI 2K15, pp.1-73, March 2000. (Contributing Author) (Co-P.I.)
    64. M. El-Gindy, B. Scanlon and R. Tallon, "Crash Test of PennDOT’s Portable F-Shaped Concrete Barrier," Final Report, No. PTI-2K12, Pennsylvania Transportation institute, The Penn State University, sponsored by Penn DOT, pp.1-33, March 2000.  (P.I.)
    65. M. El-Gindy, B. Scanlon and R. Tallon, "Crash Test of Type III Barricades," Final Report, No. PTI-2K13, Pennsylvania Transportation institute, The Penn State University, sponsored by Penn DOT, pp.1-27, February 2000.  (P.I.)
    66. M. El-Gindy, B. St. John and T. M. Engle, "Crash Test of Typical Sign Stand Supplied by Pennsylvania Industries for the Blind and Handicapped", Final Report, No. PTI-9922, Pennsylvania Transportation institute, the Penn State University, sponsored by PIBH, pp.1-11, January 1999.  (P.I.)
    67. W.P. Kilareski, M. El-Gindy, B.D. St.John and B. Pecheux, "Type 2 Weak Post Guiderail Testing", Final Report, Pennsylvania Transportation Institute, the Penn State University, sponsored by Penn DOT, No. PTI-9925, pp.1-16, February 1999.  (P.I.)
    68. M. El-Gindy and H. Lewis, “Development of a Tire Contact Stress Model based on Artificial Neural Network”, Final Report, Federal Highway Administration, Turner Fairbank Highway Research Center, Publication No. FHWA-RD-99-041, pp.1-33, November 1, 1999.  (P.I.)
    69. N. Mrad and M. El-Gindy, "Spatial Repeatability Effects on Road Damage: a Literature Review," Federal Highway Administration, Publication No. FHWA-RD-97-036, pp.1-44, September 1998.  (P.I.)
    70. M. El-Gindy and W. Kenis. "Influence of Trailer Axle Loads and arrangement on a Tractor/Semitrailer Stability and Control, "Federal Highway Administration, Publication No. FHWA-RD-97-123, pp.1-170, September 1998.  (P.I.)
    71. X.Tong, M. El-Gindy and J. Preston-Thomas, "Analysis of MCI 45’ Bus/Pony-Trailer Combination", National Research Council of Canada, Centre for Surface Transportation Technology, NRC Technical Report, No. CSTT-HWV-CTR-028, pp.1-14, March 1997.  (P.I.)
    72. N. Mrad and M. El-Gindy, "Spatial Repeatability Effects on Pavement Damage: A Literature Survey", National Research Council of Canada, Centre for Surface Transportation Technology, NRC Technical Report, No. CSTT-HWV-CTR-022, pp.1-45, August 1996.  (P.I.)
    73. M. El-Gindy and J. Preston-Thomas, "Analysis of a Bus/Pony-Trailer Combination", National Research Council of Canada, Centre for Surface Transportation Technology, NRC Technical Report, No. CSTT-HWV-CTR-015, pp.1-18, July 1995.  (P.I.)
    74. M. El-Gindy, "Analysis of a Log Hauling B-Train Configurations", National Research Council of Canada, Centre for Surface Transportation Technology, NRC Technical Report, No. CSTT-HWV-CTR-017, pp.1-18, December 1995.  (P.I.)
    75. X. Tong, B. Tabarrok and M. El-Gindy, "Computer Simulation of Logging Trucks", National Research Council of Canada, Centre for Surface Transportation Technology, NRC Technical Report, No. CSTT-CSTT-HWV-TR-004, pp.1-256, August 1995.  (P.I.)
    76. M. El-Gindy and J. H. F. Woodrooffe, "Influence of Tractor Wheelbase, Tandem-Axle Spread and Fifth-Wheel Offset on Commercial Vehicle Dynamics", National Research Council of Canada, Institute for Mechanical Engineering, NRC Technical Report, No. TR-VDL-003, pp.1-51, March 1991.  (P.I.)
    77. P.A. LeBlanc and M. El-Gindy, "Rollover and Directional Stability of a Straight Truck Equipped with a Self-Steering an Axle", National Research Council of Canada, Division of Mechanical Engineering, NRC Technical Report, No. TR-VDL-004, pp.1-42, August 1990. (Contributing Author) (Co-P.I.)
    78. J. H. F. Woodrooffe, P. A. LeBlanc and M. El-Gindy, "Technical Analysis and Recommended Practice for the Double-Drawbar Dolly using Self Steering Axles". NRC Technical Report, No. DM-010. The Roads and Transportation Association of Canada, pp.1-25, June 1989. (Contributing Author) (Co-P.I.)
    79. M. El-Gindy and J. H. F. Woodrooffe, "Study of Rollover Threshold and Directional Stability of Log hauling Trucks", National Research Council of Canada, Division of Mechanical Engineering, NRC Technical Report, TR-VDL-002, pp.1-113, February 1990.  (P.I.)
    80. J. Y. Wong and M. El-Gindy, "A Comparison of Various Computer Simulation Models for Predicting the Lateral Dynamic Behaviour of Articulated Vehicles", Technical Report of Vehicle Weights and Dimensions Study, Vol.16, Road and Transportation Association of Canada (RTAC), pp.1-123, March 1986.  (Co-P.I.)
    81. J. Y. Wong and M. El-Gindy, "Computer Simulation of Heavy Dynamic Behaviour, User's Guide to UMTRI's Models", Interim Technical Report, Road and Transportation Association of Canada (RTAC), No. 3, pp.1-198, June 1985.  (Co-P.I.)
University of Ontario Institute of Technology logo